How do I set up the OSX firewall with the License Server?

Where and how to install the Aligner License Server, and related topics

How do I set up the OSX firewall with the License Server?

Postby Peter Richterich » Fri Aug 22, 2008 9:37 am

To get license keys from the Aligner License Server, the computer that you run CodonCode Aligner on must be able to communicate with the computer that runs the License Server through your local network. To allow this communication, you may need to create firewall rules on both computers.
If you are using other programs like LittleSnitch that also control network traffic, you may also need to create exceptions in these programs.

On OSX 10.7 and newer:
  1. Quit the Aligner License Server (and/or CodonCode Aligner if you are changing settings for CodonCode Aligner)
  2. Select "System Preferences..." from the "Apple" menu
  3. Click on "Security" (in the "Personal" section)
  4. Click on the "Firewall" tab
  5. Make sure the lock at the bottom of the dialog is open to allow changes (if it is closed, click on it and enter the administrator password when prompted)
  6. Click on the "Firewall Options..." button
  7. Click on the "+" button
  8. In the dialog that appears, navigate to where you installed Aligner License Server (or CodonCode Aligner), select the Aligner License Server (or CodonCode Aligner) icon, and click "Add"
  9. Make sure the table now shows that the Aligner License Server (and/or CodonCode Aligner) allows incoming connections
  10. Click "OK" to make the change
  11. Quit System Preferences
  12. Restart the Aligner License Server (or CodonCode Aligner)

On OSX 10.6:
  1. Quit the Aligner License Server (and/or CodonCode Aligner if you are changing settings for CodonCode Aligner)
  2. Select "System Preferences..." from the "Apple" menu
  3. Click on "Security" (in the "Personal" section)
  4. Click on the "Firewall" tab
  5. Make sure the lock at the bottom of the dialog is open to allow changes (if it is closed, click on it and enter the administrator password when prompted)
  6. Click on the "Advanced..." button
  7. Click on the "+" button
  8. In the dialog that appears, navigate to where you installed Aligner License Server (or CodonCode Aligner), select the Aligner License Server (or CodonCode Aligner) icon, and click "Add"
  9. Make sure the table now shows that the Aligner License Server (and/or CodonCode Aligner) allows incoming connections
  10. Click "OK" to make the change
  11. Quit System Preferences
  12. Restart the Aligner License Server (or CodonCode Aligner)

On OSX 10.5:
  1. Quit the Aligner License Server (and/or CodonCode Aligner if you are changing settings for CodonCode Aligner)
  2. Select "System Preferences..." from the "Apple" menu
  3. Click on "Security" (in the "Personal" section)
  4. Click on the "Firewall" tab
  5. If the radio button "Allow all incoming connections" is checked, the firewall already allows incoming connections, so you are done with this computer.
    If one of the other radio button is selected, proceed as follows:
  6. Make sure the lock at the bottom of the dialog is open to allow changes (if it is closed, click on it and enter the administrator password when prompted)
  7. Select the "Set access for specific services and applications" radio button
  8. Click on the "+" button
  9. In the dialog that appears, navigate to where you installed Aligner License Server (or CodonCode Aligner), select the Aligner License Server (or CodonCode Aligner) icon, and click "Add"
  10. Make sure the table now shows that the Aligner License Server (and/or CodonCode Aligner) allows incoming connections
  11. Quit System Preferences
  12. Restart the Aligner License Server

On OSX 10.4:
The Aligner License Server requires communication on the following TCP and UDP ports: 123, 16030, 16031, 32156, 32157, 54643, 54644, and 54645.

To allow this communication to pass through the OSX firewall:
  1. Quit the Aligner License Server
  2. Select "System Preferences..." from the "Apple" menu
  3. Click on the "Sharing" option under "Internet & Network"
  4. Click on the "Firewall" tab
  5. Make sure the lock at the bottom of the dialog is open to allow changes (if it is closed, click on it and enter the administrator password when prompted)
  6. Click on the "New..." button
  7. In the "Port Name" drop-down box, select "Other"
  8. Enter all of the ports listed above in "TCP Port Number(s)"
  9. Repeat for "UDP Port Number(s)"
  10. In the "Description" enter "Aligner License Server" (without quotes)
  11. Click on the "OK" button
  12. Quit System Preferences
  13. Restart the Aligner License Server
Peter Richterich
Site Admin
 
Posts: 100
Joined: Thu Aug 21, 2008 7:23 pm

Return to Setting up the Aligner License Server



Who is online

Users browsing this forum: No registered users and 4 guests